vintage mikrofon SHURE BROTHERS, made in USA

Ameriška legenda.
Lahko tudi zapeljem na pošto.
031 337 262

UNIDIRECTIONAL DYNAMIC MICROPHONES
GENERAL
The Model 585 Series UNISPHERE~A Microphones
are dynamic microphones with a very effective filter
that provides excellent protection from wind and "pop"
(explosive breath sounds). They feature fine reproduc-
tion of music and voice, and are ideal for use with
high quality sound systems and tape recorders.
These microphones are particularly suitable for use
in theaters, night clubs, auditoriums, schools, churches,
indoors or outdoors, and any place where omnidirec-
tional microphones may not operate properly because
of poor acoustics or where wind creates a problem,
such as during outdoor receptions, inaugurations, or
sporting events. These microphones will, in almost
every instance, eliminate the annoying loudspeaker
"squeal" caused by feedback. In addition, they will
prevent echoing (boominess) that sometimes occurs
in partially-filled halls. These microphones can also
be used closer to loudspeakers than usual, without
creating feedback problems.
This suppression of feedback, combined with their
smooth sound, makes these microphones particularly
good for use with orchestras, small combos, and
singers.
Microphone Features:
A built-in wire-mesh screen with a special filter
that provides protection from wind and "pop"
(explosive breath sounds). This filter also ena-
bles singers and speakers to perform close to
the microphone.
A strong, detachable cable, especially selected
for effective shielding from hum pickup
A replaceable microphone cartridge that is
simple to change in the field
A cartridge that is protectively shock-mounted
internally. Minimizes handling noise
A built-in OnQff switch with a device to lock
the switch in its On position
An adjustable swivel adapter that enables you
to aim the microphone where you want it
A swivel that makes it easy to quietly pull the
microphone out and use it comfortably in the
hand
APPLICATIONS
The Model 585SA is high impedance for connection
to high-impedance microphone inputs.
The Model 585% is low impedance for connection
to microphone inputs rated at 19 to 300 ohms. The
low-impedance microphone is recommended where
long cable lengths are required or under conditions
of severe hum disturbance. The permissible cable
length is practically unlimited since neither response
nor level is appreciably affected. Shure Model A95
Series Line Matching Transformers are. available for
use in those cases where a low-impedance microphone
line. is desirable but the associated amplifier has a
high-impedance input. These transformers provide a
proper impedance match between a 19 to 300 ohm
microphone line and a high-impedance input and are
available with various input and output connectors.